1、柔性；主要表現在加工對象的靈活可變性，柔性自動化加工是通過（零件加工程序）來控制機床進行加工的。即更換零件時，只需改變有關軟件和少量工具夾（在某些情況下，甚至可不更換工具夾），就可實現對另一零件的加工，進行批量生產或同時對多個品種零件進行混流生產。這就顯著地縮短了多品種生產中的設備調整和生產準備時間。 1, flexible; it is mainly manifested in the flexible variability of the processing object, and the flexible automatic machining is used to control the machine tool through (part processing program). That is to say, when changing parts, we only need to change the relevant software and a few tool clips (in some cases, or even replace tool clamps), we can realize the processing of another part, mass production, or produce mixed production of multiple parts at the same time. This significantly reduces the equipment adjustment and production preparation time in multi variety production. 2、自動化；各種柔性自動化加工方法的加工設備都可實現機床操縱和加工過程的自動化。一些較復雜和功能完善的系統還可以實現工件和其他物料在加工過程中的自動搬運、存儲和交換，以及加工過程的自動監控、誤差自動補償、故障自動診斷、自適應控制和自動優化調整等功能。 2, automation; the processing equipment of various flexible automatic processing methods can realize the automation of machine control and machining process. Some of the more complex and improve the function of the system can also realize the workpiece and other materials in the process of automatic handling, storage and exchange, and the process of automatic monitoring, automatic error compensation, automatic fault diagnosis, adaptive control and automatic adjustment function.