機械設計中必須注意以下5項基本點: In mechanical design, we must pay attention to the following 5 basic points: （1）功能的機構 (1) functional institutions 實現一種功能的機構組合，一般有多種方案。設計時最好提現盡可能多的方案，給予考察。此外以開發全新產品為目標時，不僅對平時所見的常規機構，而卻對其他領域中所使用的或歷史上被看成是過失物體中的，因其中能給予啟發的東西有很多，最好也要參照。 To achieve a functional combination of organizations, there are generally many options. It is better to present as many schemes as possible in design. In addition to the goal of developing a brand new product, not only is the usual institution seen, but it is regarded as a negligent object in other fields, or historically, because there are many enlightening things, and it is better to refer to it. 此外，機械式機構大約到19世紀末達到成熟，現在幾乎所有使用的機構（自動裝置）在其歷史上都能見到。 In addition, mechanical institutions reached maturity by about the end of nineteenth Century, and almost all of the institutions (automatic devices) can be seen in their history. （2）力作用線 (2) force action line 為了只觀地表示力在機械機構中怎樣傳遞下去的狀態，將力看作猶如在構件中留動的樣子，描繪在草案圖的機械中。表示這個力“流動”的線，在設計考察中起著重要作用。例如：產生某種動作的機械，如果處于靜態平衡，難么力作用線在整體系統中封閉。如果力線不封閉，或者該機械正題開始加速運動或者在空間分解。轉動力矩的作用現也同樣。 In order to see only the state of the transmission of the surface force in the mechanical mechanism, the force is regarded as if it is left in the component, depicted in the machinery of the draft map. The line that indicates the force "flows" plays an important role in the design investigation. For example, a machine that produces certain actions, if it is in a static equilibrium, will be closed in the whole system. If the force line is not closed, or the mechanical topic begins to accelerate motion or decompose in space. The effect of the moment of rotation is the same. （3）平衡 (3) balance 僅對于由重力產生的力，其力線不封閉。這里，重力所產生的逆轉力矩成為額外難題。機械處于靜態時出現逆轉的部位是機械的根本缺陷之處。不要制作頭重腳輕或左右重力不能保持平衡的物體。這是應為這樣的物體受到一點水平向外就會(huì )翻轉的緣故。此外，把握機械的大致重量，穩心的位置也是非常重要的。特別是，如果重心水平方向位于安裝地腳之外，則會(huì )失去自身平衡，是機器出現非正常狀態，這一點要給以注意。 The force line is not closed only for the force generated by gravity. Here, the reverse torque generated by gravity becomes an additional problem. Where mechanical reverses occur, it is the fundamental defect of machinery. Do not make heavy weights or left and right gravity that can not maintain balance. This is the reason why such an object will be turned outward at a certain level. In addition, it is very important to grasp the approximate weight of the machine and the position of the center of stability. In particular, if the horizontal direction of gravity is located outside the installation ground, it will lose its balance, which is the abnormal state of the machine. （4）強度 (4) strength 力作用線有的分流，有的合流，對于其中最主要的力線，異地過要使其滿足：受力大的部位強度大，受力小的部位強度弟。尺寸過大則會(huì )造成浪費，并使動作遲緩。對于其中特別重要的部位，有必要進行強度計算。另外，力線封閉時，受拉力運動遲緩。 The force line has some shunt, some confluence, for the most important line of force, different places to make it meet: the strength of the large part of the strength, the strength of the small strength of the younger brother. Too large a size can cause waste and slow action. For the most important parts, it is necessary to calculate the strength. In addition, when the force line is closed, it is slowed down by pulling motion.