非標自動化設計注意事項： Non - standard automatic design attention: 1、對已在老式工藝生產的產品。放下你的架子，不僅僅和技術人員溝通，要找實際的操作制造工人溝通，了解實際生產過程中的問題和想法，常常會(huì )有意想不到的收獲的。 1. Products that have been produced in the old fashioned process. Put down your shelf, not only communicate with the technical staff, to find practical operators to communicate, to understand the problems and ideas in the actual production process, and often have unexpected gains. 2、分析初步設計方案所需要的條件。產品生產工藝、制定設備技術參數、明確所能承受的綜合制造成本、對比傳統制造工藝的綜合性能等，盡可能詳細。 2. Analysis of the requirements for the preliminary design scheme. The production process of the product, the technical parameters of the equipment, the comprehensive manufacturing cost that can be borne, and the comprehensive performance of the traditional manufacturing process are compared as detailed as possible. 3、選擇理想的加工方位。注意事項:安全、人性化、設備的清潔、設備組合的可能性等。本人認為是非標設備設計最主要的步驟，已經體現了設備的優和差。 3, choose the ideal processing position. Matters needing attention: safety, humanization, cleaning of equipment, possibility of equipment combination, etc. I think it is the most important step in the design of non-standard equipment, which has already manifested the superiority and the difference of the equipment. 4、功能件的合理組合。注意事項:合理的考慮升級的可能性和通用性。我們畢竟不希望專用專用，其它一無用處的。 4, the rational combination of functional parts. Note: consider reasonably the possibility and versatility of upgrading. After all, we do not want exclusive use. 5、設備的優化，不用多說了，最需要時間但很多設計者最不愿意花時間和精力的地方。要求在設備完工那一天還需不斷優化。 5, equipment optimization, needless to say, needs most of the time, but many designers are reluctant to spend time and energy. It is necessary to continue to optimize the day when the equipment is completed.